Monthly Archives: February 2018

Buyers’ Manual: What You Need to Know About Compressed Air Systems

Man checking the air systemThe manufacturing industry is reliant on compressed air systems to ensure practicality and cost-efficiency in their energy consumption. Considering the extensive and varied systems available in the market, it is crucial that you are in the know with regards to the basics of compressed air technology. Here are crucial facts that can help you make an informed consumer decision.

Compressed Air Technology

When buying a compressed air system, you must first identify the type you need. There are three kinds:

  • Packaged rotary air compressors, which boast of low maintenance cost and noiseless operation.
  • Reciprocating compressors, which are favoured in small industrial applications.
  • Centrifugal compressors, which are the most energy-efficient systems in the market and are used in high volume air applications.

These three types usually share these components: compressor, air receiver tank, dryer, distribution system, air cooler, filter, and condensate trap. It pays that you know a thing or two about these mechanisms before signing a deal with your chosen provider.

Areas to Look Into

Knowing product red flags will save you from making a faulty purchase. In terms of compressed air systems, here are some things you need to be wary of:

  • Interconnecting piping that is too small, which restricts airflow and pressure.
  • An undersized compressor, which leads to premature failure and higher upkeep costs.
  • Poor air demand management. The best systems take into account the peak periods in operation through strategic drops in air pressure.
  • Insufficient storage. Air reservoir should be appropriately sized with demand.
  • Zero staged regulation and surge tanks, which can cause system failure due to mismanaged pressure fluctuations.
  • Improper routing. Piping should ideally be as smooth and straight as possible, without tee unions and tight turns that compromise air pressure.

Smart energy consumption in the manufacturing industry begins with choosing a competently designed compressed air system. With the information included above, you’re now ready to make a choice.

 

Farming: A Source of Good Income Waiting to Be Tapped

Vast corn fieldMany Americans take the professional route to financial success, wanting to become prominent executives someday. Others engage in business because of its unlimited income potential. Few people engage in farming because it is dirty, unexciting and unattractive. If you are among them, think again.

There is money in farming, but few people realize it, and they are the ones who benefit from it. If you want to be among them, here are some things to remember.

Right crops

Corn, soybeans, wheat, cotton, and hay remain to be the priority crops in the United States. But they are not necessarily the most profitable. As a rule, go for high value, high-yielding crops. But if you are more adventurous and risk-taking than others, venture into non-traditional, but very profitable specialty crops.

Right technology

Much has changed in American agriculture. Technology has come in strongly. Modern farmers now talk of highly mechanized farming, use of GPS systems, and drones to monitor the condition of their farms. Even the use of fertilizer has changed, as farmers are now shifting to liquid fertilizer, with fertilizer tank fabrication providers servicing farms – big or small – in different parts of the country, resulting in more efficient fertilizer application.

Right marketing

Beyond the farm, marketing comes in. This is critical as this is where the farmer gets his rewards. While hunting for the right buyers will lead you to higher prices, it may also be wise to enter into a regular supply contract with a good buyer when you find one. This, however, shouldn’t keep you from having a fallback buyer. Keep in mind, though, that it is always more profitable to deal with the direct users, rather than with middlemen.

In many families, it is the older generation who do the actual farming, while the younger ones prefer employment in the urban areas, or trying their luck in business. Nothing wrong with these. But looking at new developments in the farm scene might bring about a change of mind.

Child Custody Battles: Does the Child’s Wishes Come into Play?

Parents arguing behind childWhen courts deliberate on child custody arrangements, they take into account the specific circumstances of every case. Their main goal is to ensure that the arrangement upholds the best interests of the child. In some cases, however, the court would likewise take into account the wishes of the child.

Weight of the Child’s Wishes

For courts to consider the wishes of the child, the child should mature enough to express and formulate his or her opinion and specific requests regarding custody. The extent to which the court would take into consideration these wishes would be determined by the particular circumstances of the child custody case.

What you, as a parent, need to remember is that the court would always prioritize your child’s best interests. For instance, the judge might disregard a child’s wish to stay with a parent who is a habitual drunk or substance abuser.

When Abuse Comes into Play

Conversely, a child might not want to stay with an abusive parent, particularly if the child was the victim or if he or she has witnessed the abuse at home. Also, the wishes of the child might influence the court’s decision if he or she has a preference to live with a parent with whom the child’s other siblings live with.

Do note however that some states have laws about the wishes of children when determining custody arrangements. You can get help from an experienced family law attorney in Denver, CO such as Miller & Steiert, P.C.

Plenty of states follow the rule that allows a child to decide which parent he or she wants to live with upon reaching a certain age. If the state hasn’t established such a law, courts will take into account the child’s wishes at their discretion.

Seeking Legal Help

As mentioned above, the court would consider many different factors when determining child custody orders. In some cases, the court would follow the child’s wishes, but not in others.

That said, it’s in your child’s best interest, and yours, to work with an experienced family lawyer when you present your case to make certain that the court’s final custody arrangement would champion the rights of your child.

Guide to Online Steel Shopping – Metal Structural Shapes

Stainless steel tubeWhen it comes to choosing metal for your project, there are two main considerations: structural durability and strength. There are also a wide variety of sizes and shapes to consider, not to mention the vast number of material types, such as stainless, aluminum, galvanized, etc. Here’s a quick guide if you’re shopping for steel online.

Flat Bar

This is known for its strength along the flat axis and its flexibility along other axes. The flat bar also allows for superior durability and versatility depending on the direction in which you place the steel.

Angle

Provides stability for both axis points, typically used to make flanges off a flat plate.

Square Bar

Like angle metal, square is also strong on both axis points. It is also robust in all directions.

Square Tube

Structurally, the square tube is one of the best offered in the market today. It has four walls, making it durable from every direction. It is ideal for racks, frames, buildings, bridges, automotive, and machine parts for its dense structure.

Channel

Offers reliable structural power for both y-axis and x-axis points. It is commonly used in civil engineering or building construction.

Plate/Sheet

This has several purposes in the industry. Almost every fabricated metals involve plate or sheet because of its ability to be molded or formed into shapes. Cutting machines used for this type of steel are laser, plasma cutter, press, and water cutting equipment.

Rectangular Tube

This is a trusted material for structures, and have similar properties with a square tube. However, unlike square tubing, rectangle tube carries different measurements along the y and x axes.

These days not only clothing and home appliances are being sold online. Now engineers and builders can get the steel materials that they need without leaving their workstation. Once you know which shape of metal you need, you can easily go online and purchase them without hassle.

How the Different Types of Sandblasters Work

man sandblasting metal beamsOtherwise called media blasting, sandblasting is a process that cleans paint or rust off a metal surface. It is an efficient and robust process that requires skill. At the end of successful cleaning, the metal surface should be ready for finishing.

There is more than one type of sandblaster in NZ. However, all of them use a universal principle: A powered gun propels sand to a surface at high speeds, cleaning it thoroughly. Below are the three types of sandblasters you can use to clean surfaces.

1. Gravity-fed sandblaster

Here, the gun relies on gravity to direct the silicon sand to the surface. The surface of the gun has a hopper whose job is to supply sand as the pro works.

Upon pulling the trigger, the machine releases sand while it lets more into the barrel through the hopper. The hopper then stores the sand for use in the future.

2. Pressurized sandblaster

A pressure blaster has a pressurized canister that holds the sand. When connected to the gun, and the trigger is pressed, sand comes out of the canister. This type of blaster is expensive because the canister is not refillable — expect to pay more if this is your pick.

3. Siphon blaster

As the name suggests, this blaster relies on a siphon. The gun connects to a sand reservoir and an air compressor. When air gets in, it forms a uniform sanction, causing the gun to pull the sand out through the barrel. You can reuse sand in this operation, and it is ideal for cleaning large surfaces.

Sandblasting comes in handy during home renovation or auto refinishing. It makes work efficient and saves time and energy. What takes you hours to do will take the pro a few minutes, depending on the size of the metal surface. Selecting the right kind of abrasive media goes a long way in making the process perfect.

Remove Spilled Paint While Wet, and Other Cleanup Tips

a man painting a wallSpilt paint can make any homeowner scream. Paint can be difficult to remove from any surface, but you can clean them off completely with a few expert tips.

Of course, prevention is still better than cure. When you need to colour your home interiors or exteriors, painters in Wellington can get the job done without any spills. Pets and toddlers can get in the way, however, so it will pay to be ready for any possible spill.

Clean While Wet

As much as possible, while the paint is still wet, clean the spill up. Wet paint will be the easiest to remove. Simply scoop up the paint with a spoon, cardboard, or some other tool, and scoop towards the centre.

In this way, you keep the spill from growing larger. Once you can no longer scoop the paint, you can either take the material spilled on to a dry cleaner or clean the spill yourself.

Surface-Specific Solutions

How you clean the paint yourself will depend on where the paint fell on. Spatters on glass, for example, will require dish soap and a safety razor blade. Simply mix the soap with water until it becomes sudsy. Wet the glass with the mixture, and scrape off the paint with the razor at a 45-degree angle.

More difficult surfaces include countertops, vinyl floors, and wood. For countertops, simply rub olive oil on the paint with a dry rag in a circular motion. For vinyl floors, use dish soap and water and scrape the paint off. Finally, for wood, use denatured alcohol and a clean rag.

Paint-Specific Solutions

How you clean the pain will also depend on the type of the paint. Water-based paint simple needs large amounts of water and rags. Oil-based paint, on the other hand, will require turpentine and towels or other highly absorbent cloths.

You now know what to do in case paint spills in your home, although with professional painters, you may relax and trust in the expertise and experiences the pros have with paint.

What You Need to Remember When Buying Antiques and Vintage Items

Vintage jewelry in antique wooden jewelry boxThere is something great about old items. And there is also something beautiful and charming with loving the things that have nostalgic value. Getting such items can be part of your investment strategy (especially if you are looking for Americana or Victorian) or simply an aesthetic display.

But before you go at it, there are a couple of things you need to keep in mind. This is to protect yourself and make sure that you get your money’s worth.

Here some of the items you need to take into account when buying your antique items, whether it’s a painting or a large vintage copper garden planter.

Take a good look

While old items may obviously look like it, you still need to make sure that they’re vintage just like what the seller is claiming. If you are not good at spotting and authenticating vintage items, it will be safe if you take someone with you who has experience with buying antiques.

Who’s the seller?

Be wary when buying, especially when it comes to a seller. Shortlist at least three, and then look into the offerings of each. More importantly, look at the price points and their range. If you are not sure with your choice, you can always ask your family or a friend who is experienced with these things for validation and recommendation.

Consider going online

If you can’t find a decent seller in your community, you can always go online. Many online sellers offer a wide range of products, from vintage tables to postcards. But before you finally close a deal, it is advisable that you read reviews.

These are some of the things to keep in mind if you are planning to buy antiques and vintage items. Always ask a lot of questions, as these will reveal a lot of things about the seller and the items.

4 Packaging Material Types You Can Use

Cooking oil in plastic bottle packagingFirst impressions last. This is the reason businesses invest in packaging materials — not only to keep their products safe, but also to market them.

NashPackaging.com and other packaging supply companies use a variety of materials depending on client needs. As a business owner, it’s important to know the different types of materials to know which one is the best for your business.

1. Plastic

This is one of the most common types of packaging because of its versatility, durability, and affordability. Over the years, however, people have seen the negative effects that plastic packaging brings to the environment and is putting on efforts to reduce consumption or find alternative ways to produce them.

2. Paper

Tissue paper is usually stuffed in boxes to avoid movement in the packaging, while big cardboard boxes are used to store and ship materials that are already packed. Paper packaging has many uses and comes in various designs. It’s one of the most affordable and most eco-friendly packaging materials.

3. Metal

Metal packaging is commonly used in food like canned goods, as well as medicine (think foil wrappers). It is known for its durability and increased protection. While metals can easily be recycled, it costs more than the first two materials due to its qualities.

4. Glass

It can be recycled over again without losing its original quality. This is perhaps one of the most notable characteristics of glass packaging. Glass is often used in food, cosmetics, drinks, and even decorative items. The use of glass gives an image of higher or superior quality and is the reason why its market is still very wide at present.

Your packaging says a lot not just about your product, but your company as well. Choose and invest in them wisely.

Why Mediation is the Solution in Company Disputes

Twp workers angry with each otherWith the rise of labor and workers’ rights, disputes between companies and their employees have risen too. Fortunately, governments and businesses have now devised strategies to lessen court cases between companies and employees.

Most business and company disputes can be settled. When a case is filed, you can avoid a long process that might take years, and save time and money that will be spent on legal fees.

If you can settle, you could also prevent further strain on your business relationships. You don’t have to go through a stressful court case.

Considering Mediation

Mediation is a good way to resolve disputes that arise from employment disputes, such as illegal termination, and age discrimination. It is worth trying to resolve matters because it can be beneficial to both parties.

When choosing mediation for employees, the first essential step for both parties is to talk with a qualified mediator to facilitate the discussion. This would be a great way for both parties to reach an agreement and find a solution to the conflict.

Talking things over to find a solution can be the key to quickly resolving a dispute. There are times that emotions can cloud sensibility, and a mediator can help both parties reach an agreement that could help the company overcome this hurdle.

Resolving the Problem

Employees have rights and businesses have interests. There are times that there could be a conflict between the two, and the best way is to resolve it through mediation.

So don’t be too quick to jump into a court case when you find that your company could be involved in a legal dispute. The best move is to find a mediator who could help facilitate a dialogue between you and the other party.