Tag Archives: Home Maintenance

Common Drain Issues and Cost of Repair

Pipe being fixed with wrenchA house’s plumbing system is one of the most overly used parts of the home. If not maintained regularly, the network of pipes and tubes could face severe blockage and fail. Homeowners prepare for these major repairs, but sometimes the extent of the damage can be serious.

Cost of Unblocking Drains

Simple drain unblocking tasks are often inexpensive because most households would go the DIY route. It would perhaps require only a plunger or at least $20 for a bottle of unblocking solution. In general though, a plumber is paid an hourly rate of at least $45. In some upscale locations, a plumber’s hourly rate could go as high as $150/hour. Moreover, the severity of the blockage would increase the cost of a service. Complex drain blockage solutions like clearing the main lines are typically more expensive than simple unblocking jobs.

Common Drain Blockages at Home

Sink or Bathtub Drain

This type of blockage is caused by food debris, grease, hair, and soap and detergent residue. If sink and tub drains are not cleared regularly, the buildup of residue and food debris would obstruct the lines, and trap water and cause backflow. You could expect to pay up to $214 even for simple drain clearing tasks because plumbers normally charge based on the type of service and not on the amount of work exerted.


Avoid flushing napkins, toilet paper and other large objects down the toilet or you would be dealing with toilet blockage soon. Unlike the sink and the tub, clearing the toilet is an unpleasant experience. You would need gloves and a snake tool to unclog it, or pay the plumber between $110 and $273 to clear the blockage.

Main Line

Although you would find an industrial snake rental for just $30, you should only attempt to fix a main line problem when you know exactly how this is done. Otherwise, you should consider professional plumbing services. This type of service could cost up to $800.

Drains must be cleared as often as possible to avoid severe blockage. Severe blockages may need professional servicing because they are complex tasks requiring special tools. You shouldn’t ignore it until it’s too late.

Properly Maintain Your House in 3 Practical Ways

Interior of a modern living roomMany people can’t help but admire the beautiful homes featured on TV shows and in magazines. What they probably don’t realize, however, is that it takes more than just great architectural and interior designs for a home to be beautiful. It also involves proper maintenance.

Here are three useful tips for properly taking care of a house.

Conduct inspections regularly

First, thoroughly inspect your house on a regular basis. By doing this, you’ll be able to spot concerns that need to be addressed. You’ll find out, for instance, if the attic walls need to be repainted or if a step in your wooden spiral staircase needs to be replaced. Additionally, regular inspections will help you detect more serious problems like mold and termite infestation, which can both compromise your house’s structural integrity.

Solve problems immediately

Second, once you detect them, address any problems in your house immediately. Letting them fester not only will inconvenience you, but may also damage something in your house. A leaky pipe, for example, may result in water damage that can cause problems for your hardwood floors. If you can’t solve problems by yourself, though, you should hire professional water damage services in Salt Lake City to get the job done.

Clean the house frequently

Lastly, you should, of course, frequently clean your house. No matter how beautiful, your home won’t be appealing if it’s not neat and tidy. Aside from ruining your house’s appeal, however, elements like dirt, dust, grime, and gunk can cause some damage to your home as well. Grime, for one, may discolor wooden surfaces in your house if left unchecked for a long time, while dust can mess up your electronic gadgets and appliances.

So help your home stay beautiful and in good condition by properly maintaining it through regular inspections, quick problem resolution, and frequent cleaning.

Bed Bug Infestation: Ways to Prevent and Stop It

Clean, modern style bedAlthough bed bugs are not known to transmit diseases to people, they can be a nuisance in your home. Members of your family might have different responses to their bites. If you don’t want your family to sport red, itchy bites on their skin, you need to have these measures in place.

Maintain cleanliness

Thoroughly vacuum your home regularly especially those hidden areas, which could be the perfect hiding spots for bed bugs. When you’re changing bed sheets, you also need to take the time to inspect the mattress for blood spots, cast skins, or bed bugs feces, which could appear like tiny dark spots on the seams, tufts, or folds of your mattress. Furthermore, avoid clutters in your home to reduce hiding spots for these critters.

Be vigilant

When you’re using shared laundry facility, be sure to transfer your clothes from the dryer directly to a new plastic bag. High temperature eliminates these critters, which is why pest control professionals employ bed bug heat extermination methods to eliminate these pests.

If you’ve had visitors, be extra mindful when you’re cleaning the house, as bed bugs can easily be transported through their luggage.

Know the early signs of infestation

It helps to be aware of the early signs of bed bug infestation before they get out of hand. Some signs to look out for are itchy bite marks in areas like the arms, hands, face, and neck. Some bite marks could disappear after a couple of days while some could become a fluid-filled blister. You could also sense a musty and unpleasant smell in the room.

Bed bugs are one of the most resilient pests. They spread from room to room, and they can travel long distances lodged in clothes, furniture, or luggage. And they can go on without food for months and even years. Thus, if you’ve noticed some signs of infestation in your home, it’s best to be proactive in dealing with it and seek the advice of a professional before it gets to be too much of a problem.

Home Maintenance: The Drill on Air Duct Cleaning

Man Holding an Air DuctMaintaining a healthy home is a major concern for homemakers. Keeping it that way for the entire family means a lot. One of the more important things to remember is to keep the heating and cooling systems well-maintained, cleaned and inspected on a regular basis. That takes a toll on the overall indoor air quality.

Cleaning as Part of Regular Maintenance

Cleaning is an essential part of regular maintenance. Especially when it comes to your home’s heating and cooling systems, which are prone to dust and grime buildup, you have to include cleaning tasks to keep them fully functional. That’s not all. These units release the dirt buildup that accumulates on the ducts and other parts of the system when it starts.

It is for that simple reason that homeowners need the services of professional air duct cleaning companies in Indiana: air ducts get dirty. The air in your house could get contaminated with a lot of things, from the regular dirt and dust to pet hairs, cigar smoke, and even water. Once the ducts get dirty, they could infiltrate indoors, keeping sensitive occupants, especially those with allergies and asthma, at risk.

A Task Most Homeowners Forget

Since ducts are not visible, regular maintenance schedules could easily slip your mind. That’s why it is advisable that you take note of periodical maintenance that will not only clean your system but also check for possible repairs needed. Your heating and cooling systems must be 100% functional and the only way to ensure that is through thorough professional inspection.

Another advantage of keeping air ducts clean pertains to energy savings. A clean system is an utterly functional and energy-efficient one.

If you want to improve how your home’s heating and cooling system work, remember to give it regular maintenance. Checkups, cleaning, and repairs will do it well.

Here’s How to Repair Your Damaged Drywall, the DIY Way

Drywall patching

Patching a drywall is not rocket science. It is actually easy, and the key to a successful DIY project is having the right drywall equipment, knowing the right methods and having tons of patience.

Here are some tips when patching holes and cracks in a drywall:

Have the right tools

You need to have the right tools to successfully patch a drywall. Patching a drywall will  require you to cut a hole in your wall that’s only slightly bigger than the damage. In doing this, you can’t use conventional tools like a regular saw, or you can risk damaging the other parts of the wall.

It pays to have at hand a drywall saw, a drywall knife, a drill or screwdriver, 100 grit sandpaper, backer boards and setting compounds.

Know the right methods

Now that you have the tools, you need to know the right way to repair the damage. The first step is squaring the hole using your drywall saw and knife. Yes, you read it right. You need to cut a bigger square around the hole.

Then, put the backer board in the square that you cut. Note that the board should be bigger than the square. Once in, screw the sides of the backer board into the wall. Then cut a new piece of drywall to patch up the square.

Cover all sides with mesh tape, then apply the compound evenly. Apply three layers of compound. Allow it to completely and evenly dry before putting the next layer.

Apply finishing

Once it is patched and dry, use  sandpaper to smoothen out the area. Do not forget to apply primer before painting it. Doing so can help your newly fixed drywall absorb the paint properly.

Congratulations! You just finished patching a damaged drywall. You may now repair the holes in the drywall in the other rooms with confidence.