One of the ways to break away from the daily grind is to go sightseeing with family or friends. While flying may be expensive, going on a road trip can provide a charming substitute. Before you switch on the radio and get the car to the open road, check the parts of your vehicle to avoid inconvenience while you’re on a long trip.
Check the cables and terminals. Tighten and clean them if necessary. Test the voltage and look inside for low water.
Examine the amount of tread left along the side wall using a tread gauge or a penny; if you use a penny, change the tires when you see the top of Washington’s head. Consider bringing a spare tire, in case of emergency. Furthermore, inspect the alignment and air pressure.
To avoid breakdowns or unnecessary stops, inspect the fluid levels, including oil, brake/clutch fluid, coolant, and power steering fluid. Refer to your manual if you are having a hard time locating the reservoirs. Along with the filter, change oil before leaving if needed.
Aside from the fluid, test the brake. If the brake pads are worn, replace them. Taysomtire.com, brakes repair company in Orem, UT says vibration in the pedal or steering wheel when you step on the brake indicates a problem.
Check both the engine filter and the cabin filter. An adequate and clean supply of air not only saves gas, but also enhances your car’s efficiency and performance.
Windshield wipers and blades.
The blades dry off and harden because of continued use and exposure to the sun. You need to install new wipers if they already leave a milky mist or squeaky when used.
Make sure the headlights, tail lights, reverse lights and other signals are functional and properly aligned for increased visibility at night, especially along poorly lit streets. Consider bringing extra bulbs.
A long trip is a test for you and your car. Your trip should be enjoyable, not stressful. So, prevent mechanical issues or breakdowns by ensuring your car is in its best shape before you hit the road.